Eleaf iStick Pico 25 with ELLO
The iStick Pico 25 ingeniously packs an enormous 0.91-inch screen that gives a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function during a compact, stylish yet powerful package. Powered by a single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and may handle various tanks up to 25mm diameter.
The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for straightforward filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
To take advantage of the additional space, the Pico 25 mod is shipped with a 2ml capacity, ELLO Tank. This 25mm diameter tank comes pre-fitted with one among Ileaf’s HW1 single-cylinder coils. With a sweet spot between 50 and 65 Watts, this chrome steel coil performs exceptionally well in both VW and TC modes. the choice ‘dual-cylinder’ HW2 Kanthal coil generates great flavor at slightly lower wattages in VW mode only.
The star feature of the ELLO tank is it’s slick, push-back top cap. this provides you rapid access to a well-proportioned filling slot. The permanently attached top cap won’t roll away when you’re doing a clumsy fill during a hurry. The ELLO tank comes with a precision-engineered, dual-port adjustable airflow ring on the bottom.
The iStick Pico 25 mod runs on one 18650 battery (not included). Somehow, Eleaf has squeezed a tremendous selection of variable wattage (VW) and temperature control (TC) features into its tiny, 104 x 48 x 25mm case. The OLED screen is little and functional – also as showing the VW/TC essentials, it’s easy to a click-in puff counter, vape current, or vape timer displays. Moving between the Pico 25’s vape modes is fast and straightforward.
A series of single clicks cycles through Wattage, Bypass, Ni, Ti, and SS TC modes, alongside 3 custom TCR memory slots. This feature-rich mod also allows adjustment of the wattage in TC modes. Full details of those (and many other) functions are provided within the user manual.
1 x Eleaf iStick Pico 25 Mod
1 x Eleaf ELLO 25mm Atomizer Tank
1 x Eleaf HW1 0.2 Ohm Single Cylinder Coil (Fitted)
1 x Eleaf HW1 0.3 Ohm Dual Cylinder Coil (Alternative)
1 x Spare Seals Bag
1 x USB Charging & Firmware Upgrade Cable
1 x User Manuals For Mod & Tank
Eleaf iStick Pico 25 Mod Features:
Size: 58mm tall (without tank), 48mm long, 25mm wide
Compatible tank diameter: Up to 25mm
Tank connector: 510 screws with a spring-loaded pin
Style: Compact, fashionable VW/TC/Bypass mod with advanced features
Battery type: 1 x 18650 battery (not included)
Easy battery fitting & removal with a screw-top compartment cap
Capable of quick 2A USB charging (cable included)
External battery charger recommended (not included)
Simple, high-quality OLED screen with easy navigation
Setting buttons: Space-saving location on the base of the mod
The screen flips for LH/RH operation
Modes: Variable wattage, bypass & temperature control with 3 x TCR memory slots
Custom power boost feature
Wattage control in TC modes
Mechanical mod simulation in Bypass mode
Stealth & lock features
Output power: 1 to 85 Watts
Temperature range: 100 to 315º Centigrade
VW (& Bypass) mode coil resistances: 0.1 to 3.5 Ohms
TC mode coil resistances: 0.05 to 1.5 Ohms
TC coil wires: Titanium, Stainless Steel or Ni200
On-screen battery power icon
Recognises new atomizer connection
On-board software upgrades available via USB (Mac & Windows)
5 clicks on Fire button for on/off safety
Vape safety cut-out after 10-sec firing
Atomizer low short circuit & low resistance protection
Low battery voltage protection
Board overheating protection
New styling with room for 25mm tanks
Great compact/backup mod for experienced vapers
Ideal as a future-proof mod for new sub-ohm vapers
Easy-to-use menu system
Advanced functions also available
Compatible with a wide range tanks, drippers & RBA’s
Available in trendy colours: Full Black, White/Green, Blue/White, White/Black, Silver/Black or Black/Red.
Eleaf ELLO 25mm Tank Features:
Tank diameter: 25mm
Tank height: 46mm (with drip-tip)
E juice capacity: 2ml, TPD legal
Tank casing: Stainless Steel
Fitted with a wide-bore Delrin drip-tip
Alternative tapered drip-tip included
Drip tips not 510 compatible
Connector: 510 screws with the fixed positive pin
Push-back top cap for access to large e juice fill port
Replaceable Pyrex e juice tank
Traditional coil replacement (base screw)
Fitted coil: 0.2 Ohm Eleaf M1 single-cylinder SS316 coil (40 to 80 Watts)
M1 Stainless Steel coil suitable for VW & TC vaping
Alternative coil: 0.3 Ohm Eleaf M2 dual-cylinder Kanthal coil (30 to 70 Watts)
M2 coil is only suitable for VW vaping.
Coil wicks: 100% organic cotton for pure flavour
Adjustable cyclops airflow ports in the base
Nice tank for practical sub-ohm vaping between 40 and 65 Watts
Produces satisfying clouds & great flavour
Clean & easy to use
Colour matched with Pico 25 mod
Eleaf iStick Pico 25 ELLO Starter Kit Compatibility:
Both the iStick Pico 25 mod and ELLO 25mm tank can be swapped with compatible mods/tanks having standard 510 connectors.
Please check your equipment manuals to ensure compatibility. Inexperienced vapers may prefer to use the Eleaf iStick Pico 25 starter kit as supplied.